BenQ PE8720 Manuel d'utilisateur télécharger pdf (Page 13)

Overview

English

Remote control

Remote control operation

• Make sure that there is nothing positioned between the remote control and the infrared (IR) sensor on the

projector that might obstruct the IR beam from the remote control reaching the projector.

• The effective range of the remote control is up to 8 meters, and at an angle within 45 degrees of the IR beam.

• Always aim straight at the projector, however most screens will also reflect the IR beam to the projector.

1. POWER button

Toggles the projector between standby mode and on.

When the projector is in standby, press once to turn the projector on.

When the projector is on, press twice to turn the projector to standby.

See pages 19, 23 and 34 for details.

2. Source selection buttons (COMP1, COMP2, VIDEO, HDMI, RGB HD, S-

VIDEO)

Selects an input source for display. See page 27 for details.

3. Aspect buttons (ANA, 4:3, LB, WIDE, REAL)

Selects the display aspect ratio. See page 27 for details.

4. PRESET button

Selects one of the preset program modes (Cinema, Home Theater, Family

Room, Photo, Gaming). See page 20 for details.

5. MEMORY buttons (1, 2, 3 and DEFAULT)

Restores picture settings saved in Memory locations 1, 2, 3 or Default for

the current input source. See page 26 for details.

6. Arrow buttons (Left e, Up c, Right f, Down d)

Moves the current On-Screen Display (OSD) menu selection in the

direction of the arrow being pressed. See page 25 for details.

7. ENTER button

Enacts the selected On-Screen Display (OSD) menu item. See page 25.

8. MENU button

Toggles the On-Screen Display (OSD) menu on and off. See page 25.

9. EXIT button

Exits and saves any changes made using the On-Screen Display (OSD) menu. See page 25 for details.

10. Picture quality adjustment buttons (BRIGHTNESS, COLOR, CONTRAST, TINT):

Displays the setting bars for adjustment of the appropriate picture quality values. See page 26 for details.

11. IRIS button

Displays the setting bar for the adjustment of the motorised aperture lens iris.

12. Picture window control buttons (PIP, POP, +, -, ACTIVE)

Displays the Picture In Picture (PIP) or Picture On Picture (POP) windows with the PIP and POP buttons

respectively, toggles between the main window and sub-window, or left window and right window with the

ACTIVE button, and adjusts the size of the currently active window with the + or - buttons. See page 22.

13. Picture enhancement buttons (ZOOM, FOCUS, LENS)

Displays the setting bars for the adjustment of the motorised Zoom, Focus, and vertical Lens shift values

respectively.

14. LIGHT button

Turns on the remote control backlight for about 10 seconds. Pressing any other button while the backlight is

on keeps the backlight on for a further 10 seconds. Press the Light button again to turn the backlight off.

ENTER

up to 8m

PE8720-en.book Page 13 Friday, May 13, 2005 5:19 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

BenQ PE8720 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données BenQ PE8720