BenQ W1080ST Manuel d'utilisateur télécharger pdf (Page 22)

Positioning your projector

Connecting component-video devices

Be sure to match the corresponding colors between the cables and the terminals. The RCA type

component video jacks are provided for connection to video output devices. You should also connect the

separate audio cable to a suitable audio amplifier.

Connecting S-Video or video devices

You need only connect S-Video or composite Video cable from the same device, never both at the same

time. You should also connect the separate audio cable to a suitable audio amplifier.

• If you have already made a Component Video connection between the projector and the video source

device, you need not connect to this device again using an S-Video or composite Video connection as this

makes an unnecessary second connection of poorer picture quality. You need only connect using a

composite Video connection if both Component Video and S-Video are not supplied on the video source

device (for example, with some analog video cameras).

• If the selected video image is not displayed after the projector is turned on and the correct video source

has been selected, please check that the video source device is turned on and operating correctly. Also

check that the signal cables have been connected correctly.

AV equipment: DVD player, digital

tuner, etc.

From audio output

terminals

To a u d i o i n p u t

terminals

Component video cable

From audio output

terminals

To audio input terminals

S-Video cable

Video cable

AV equipment

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 60 61

Pas de commentaire

BenQ W1080ST Manuel d'utilisateur Page 22