BenQ MP512 - SVGA DLP Projector Manuel d'utilisateur télécharger pdf (Page 53)

Maintenance 53

5. Pull out the lamp connector from a slot

in the lamp compartment. Disconnect

it from the projector as illustrated.

6. Lift the handle so that it stands up. Use

the handle to slowly pull the lamp out

of the projector.

• Pulling it too quickly may cause the lamp

to break and scatter broken glass in the

projector.

• Do not place the lamp in locations where

water might splash on it, children can

reach it, or near flammable materials.

• Do not insert your hands into the projector

after the lamp is removed. If you touch the

optical components inside, it could cause

color unevenness and distortion of the

projected images.

7. Insert the new lamp into the

lamp compartment and make

sure it fits in the projector.

8. Reconnect the lamp connector

and place it back into its slot to

be flush with the projector.

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Pas de commentaire

BenQ MP512 - SVGA DLP Projector Manuel d'utilisateur Page 53