BenQ MP620P - XGA DLP Projector Manuel d'utilisateur télécharger pdf (Page 53)

Maintenance 49

3. Remove the lamp cover from the projector.

Do not turn the power on with the lamp cover

removed.

4. Remove the lamp cords from the slots.

5. Disconnect the lamp connector by pushing it

against the projector while pulling it up.

6. Loosen the screw that secures the lamp.

7. Lift the handle so that it stands up. Use the

handle to slowly pull the lamp out of the

projector.

• Pulling it too quickly may cause the lamp to

break and scatter broken glass in the projector.

• Do not place the lamp in locations where water

might splash on it, children can reach it, or

near flammable materials.

• Do not insert your hands into the projector

after the lamp is removed. If you touch the

optical components inside, it could cause color

unevenness and distortion of the projected

images.

8. As shown in the figure, lower the new lamp

first and align the two holes on the lamp with

the locators on the projector.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Pas de commentaire

BenQ MP620P - XGA DLP Projector Manuel d'utilisateur Page 53