BenQ TS513P Manuel d'utilisateur télécharger pdf (Page 48)

Maintenance48

14. Connect the power and restart the projector.

7. Use the handle to slowly pull the lamp out of

the projector.

• Pulling it too quickly may cause the lamp to break

and scatter broken glass in the projector.

• Do not place the lamp in locations where water

might splash on it, children can reach it, or near

flammable materials.

• Do not insert your hands into the projector after

the lamp is removed. If you touch the optical

components inside, it could cause color

unevenness and distortion of the projected

images.

8. As shown in the figure, lower the new lamp.

9. Reconnect the lamp connector to the

projector.

10. Tighten the screw that secures the lamp.

11. Ensure the handle is fully laid flat and locked

in place.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

12. Replace the lamp cover on the projector.

13. Tighten the screw that secures the lamp cover.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Pas de commentaire

BenQ TS513P Manuel d'utilisateur Page 48